NARDA NBM-550, Operating Manual

Page: 102 / 156

8 Setup and configure
92
NBM-550 Narda
Setting the power on behavior
You can use the
Power On
function to specify the
instrument setup that is loaded when you switch on the
NBM-550. The following settings are possible:
•
Previous
: The settings in use when the instrument was
last switched off are restored.
•
Default
: The settings saved under Default are restored.

Press the
Power-On
function key to toggle between the
two settings.
Note:
The selection displayed is active.
8.3 Displaying instrument and probe
information
The following information is displayed in the INFORMATION
menu:
•
Device Information
: Information about the instrument,
including:
– The last and the next calibration,
– Option 1, 2,... (options installed)
•
Probe Information
: Information about the probe used
•
Device Diagnostic
: Service information
•
Probe Test
: Checking all 3 channels (Ch1...Ch3) with a
test source for proper operation
Displaying the information

Open the required function in the MAIN/INFORMATION/
... menu.