NARDA NBM-550 Operating Manual Download Page 126

Page: 126 / 156

11 Instrument maintenance

116

NBM-550

Narda

11.1 Cleaning the instrument

Cleaning the instrument

1. Use a soft cloth to clean the instrument. You can use

lukewarm water to which a little detergent solution has
been added as a cleansing agent.

2. To prevent streaks and spots, wipe off the instrument

with a dry cloth while it is still damp.

NOTICE

Damage to the instrument from liquids

The instrument may be damaged or destroyed if
liquids are allowed to get inside the casing.



Make sure that no liquid gets inside the instrument.

NOTICE

Solvents

Solvents can corrode the surfaces of basic unit,
probe and AC Adapter / Charger.



You must not use solvents to clean the basic unit,
probe, and AC Adapter / Charger.

Summary of Contents for NBM-550





























































































































































Search results

Summary of Contents for NBM-550

Reviews:

Brands by name

Popular brands

NARDA NBM-550, Operating Manual

Search results

Summary of Contents for NBM-550

Reviews:

Brands by name

Popular brands