NARDA NBM-550, Operating Manual

Page: 100 / 156

8 Setup and configure
90
NBM-550 Narda
8.1 Configuring the interface
You can use the serial interface via USB or an optical
connection.
Configuring the interface
Open the
Serial Interface
function (MAIN/INTERFACE/...).

Use the arrow keys
▲
/
▼
to select
USB
or
Optical
and
press the
OK
key.
Note:
Logging parameters (e.g. the baud rate) are permanently
set and cannot be changed (see
“Interfaces”
on
page 125).
8.2 Saving and loading instrument settings
You can save your current instrument settings (setups) and
recall them when you need them again. Nine memory
positions are provided for such settings, so you can save
setups for different measurement tasks or for different
users, for example.
Note:
You can use the NBM-TS PC software to store the setups
completely in the database and upload them to the
instrument again when they are needed.
Menu overview

Open the MAIN/SETUP menu.
Default
These settings will be used when the instrument is
switched on as long as Power On = Default.
Setup 1-8
Memory positions
User
Indicates that a user setup is stored at this
memory position
Factory
Indicates that the factory default settings apply
because a user setup has not been stored