manualshive.com logo in svg

NARDA NBM-550, Operating Manual

Share
Download
NARDA NBM-550 Operating Manual Download Page 18

2   Safety instructions

8 

NBM-550

Narda

2.1

Using this operating manual

Carefully read this entire operating manual before you 
start using the instrument.

Keep this operating manual so that it is available to 
everyone who uses the instrument, and ensure that this 
operating manual is with the instrument if you pass it on 
to a third party.

2.2

Proper use

The NBM-550 is designed to measure and evaluate 
electromagnetic fields.

Only use the instrument for the purpose and under the 
conditions for which it has been designed.

In particular, observe the technical data given in the 

“Specifications”

 on page 123.

Proper use also includes:

observing any national accident prevention regulations 
at the place of use.

ensuring that the instrument is used only by 
appropriately qualified and trained persons.

2.3

Improper use

The NBM-550 is not a warning device that gives active 
notice of the existence of dangerous fields by means of a 
visible or audible warning signal.

Remember that this instrument is a measuring device, 
not a warning device.

Carefully observe the actual measurement displayed 
when you are approaching an unknown field source.

If in doubt, use an additional warning device such as 
“RadMan” or “Nardalert”, available from Narda Safety 
Test Solutions.

Summary of Contents for NBM-550





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands