NARDA IDA, Operating Manual, Page: 61 / 292

4.5 Fundamental operating steps
Narda IDA - 3106
53
Extended list
You can select more than one entry or item from an extended list. You can
select one item at a time or use the softkeys to select all the items. This is
demonstrated by the selection of channels in the example below.
Figure 14: Example of an extended list: Select menu
To select or deselect items individually using the rotary control knob:
1.
Use the rotary control knob to highlight the desired item.
2.
Press the
Select
key to select or deselect the item.

The selection box shows the actual status.
3.
Press the
OK
key to return to the measurement display.
To select or deselect several items at the same time:
Use the following softkeys to select or deselect all the items or a group of
items in a list.
NOTE:
The softkeys that are actually available depend on the Select menu that is
opened.

When you have selected the items you want, press the
OK key to revert
to the measurement display
again.
A selection box indicates if the option has been selected or not in an
extended list.