NARDA IDA, Operating Manual, Page: 229 / 292

13.2 Viewing and recalling data sets
Narda IDA - 3106
221
13.2 Viewing and recalling data sets
Main Menu • Memory Menu

Press the
Data Viewer
softkey.

The list of saved data sets is displayed.
Table 40: Column descriptions
To view a data set:
 Select a data subset using the rotary control knob and press the
Recall Data Set
softkey or the
OK
key.

The data set is displayed in the form that it was saved.
RECALL
on
the screen indicates that the data set is a saved data set.
Column Function / Explanation
Index Consecutive index number
Num. Number of data subsets (every saved value in a localization or a
timer or condition controlled measurement is a data subset)
Mode Operating mode saved from:
• DIR_FIND: Direction Finding
• SPECTRUM: Spectrum Analyzer
• SGRAM: Spectrum Analyzer / Spectrogram
• LEVEL: Level Meter
• SCOPE: Time Domain (Scope)
• IQ_ANLZ: I/Q Analyzer
• MCP: Multi-Channel Power
Storing Save type
• MAN: Manual (all operating modes)
• LOC: Localization (Direction Finding mode only)
Additionally for SPECTRUM, LEVEL and MCP modes:
• TIME: timer controlled storage
• AUTO: Event-controlled storage using the AUTO SAVE function
Date Date of storage
Time Time of storage
Comment Comment (if activated)
Tip:
• You can use the softkeys to page through the list.
• You can use the softkeys to jump to the previous or next data set
in the data viewer as well as in the operating modes.