NARDA IDA, Operating Manual, Page: 194 / 292

10 Time Domain (Scope) Mode
186
IDA - 3106 Narda
10.3.3 Selecting the trace type / detector
The
Measurement
softkey is used firstly to set the sub mode. Depending on
this setting, only the associated trace types/detectors will be available under
Trace / Detector
.
To select a trace type/detector:
1.
Press the
Measurement
softkey and select a sub mode.
2.
Press
OK
or
ESC
to exit from the menu.
3.
Press the
Trace / Detector
softkey, select an item using the rotary
control knob, and press
OK
to set the selection.

If you selected
High Resolution Scope
sub mode, the
Trace/
Detector
softkey is not shown. Only the detector
Act
is possible.
Table 35: Sub mode and available trace types / detectors
Sub mode Trace type/
detector
Function / Explanation
High Resolution
Scope
Act Value measured at the moment
(The
Trace
softkey is hidden)
Long-Time Scope +Peak,
RMS,
-Peak
Detector:
Maximum, average, and minimum value within
a compressed time interval