NARDA 8718B, User Manual

Page: 98 / 137

97 Chapter 16 Operation with a Fiber Optic Link
To set the meter to use the fiber optic receiver input...
1. Access the menu system by pressing the function key
that corresponds to the legend below MENU on the
bottom line of the display.
2. Press 8 ( NEXT ) to select the Second Menu Screen .
3. Press 3 to select CABLE/FO . A new screen will appear
that shows the current input status.
4. Press F1 ( OK ) to continue with the same input without
change. The meter will return to the First Menu Screen .
Press Esc to return to the measurements screen.
5. Press F4 ( FO ) to change to the fiber optic receiver
input. The meter will return to the First Menu Screen .
Press Esc to return to the measurements screen.
To set the meter to use the cable input...
6. Access the CABLE/FO menu as previously described.
A screen will appear that shows the current input status.
7. Press F1 ( OK ) to continue with the same input without
change. The meter will return to the First Menu Screen .
Press Esc to return to the measurements screen.
P R O B E I N P U T S T A T U S
C A B L E O N :
F I B E R O P T I C : O F F
O K F O
F1 F2 F3 F4
P R O B E I N P U T S T A T U S
C A B L E O F : F
F I B E R O P T I C : O N
O K C A B L E
F1 F2 F3 F4