NARDA 8718B, User Manual

Page: 94 / 137

93 Chapter 15 Advanced Settings
3. Press F1 ( OK ) to continue with the same setting
without change. The meter will return to the First Menu
Screen . Press Esc to return to the measurements
screen.
4. Press F4 ( LEFT ) or F4 ( RGT ) to change to the alternate
setting for function key menu position. The meter will
return to the first menu screen. Press Esc to return to
the measurements screen.
Adjusting the Display Contrast
The LCD display is set at the factory for the best contrast under
typical conditions. The user can adjust the contrast to optimize
visibility under specific lighting conditions.
To adjust the display contrast...
1. Access the settings menu by following the procedure
described in Accessing the Settings Menu .
2. Press 5 to select DISPLAY . A new screen will appear
that shows the current setting. The adjustment range is
from 0 - 9 , with 0 the lightest setting and 9 the darkest
setting.
3. Press F1 ( OK ) to continue with the same setting
without change. The meter will return to the First Menu
Screen . Press Esc to return to the measurements
screen.
D I S P L A Y C O N T R A S T
C U R R E N T S E T N G T : 6
0 = L I G H T 9 = D A R K
O K S E T
F1 F2 F3 F4
I