NARDA 8718B, User Manual

Page: 52 / 137

51 Chapter 8 Data Logging
15. To end this logging run and begin a new run, press F3
( END ). The screen will appear that allows you to enter
another two-digit survey number.
16. Use the numeric keypad to enter a new two-digit
survey number and then press F1 ( OK ) or ENTER .
Again, make note of this number so that you can later
associate this survey number with the data points
collected. If you make a mistake, press F2 ( CLR ) to
clear the screen and enter a new survey number.
The meter will automatically return to the
logged-measurements screen.
17. To end logging altogether and return to the standard
measurement screen, press F4 ( QUIT ). To initiate
logging again at a later point, use the menu system to
select DATA LOG from the First Menu Screen .
N E W L O G G I N G R U N :
E N T E
N E W F R N O . _ _
O K C L R M E N U Q U I T
F1 F2 F3 F4
R E
Mode 3 Logging
To initiate Mode 3 logging (a series of data points
automatically logged at specific intervals)...
1. From the main data logging screen, press the
number 3 on the keypad to select CONTINUOUS
LOGGING from the logging menu screen.
1 L O G W I T H R E F #
2 L O G A V G W I T H R E F #
3 C O N T I N U O U S L O G G I N G
M E M Q U I T
F1 F2 F3 F4