NARDA 8718B, User Manual

Page: 34 / 137

33 Chapter 5 Using the Menu System
MAIN Main – switch to the Main Measurement Display
Screen.
MAXR Maximum Reset - reset the maximum value to
the instantaneous value.
MEASURE Measure – begin the measurement process by
selecting and zeroing the probe.
MEM Memory – display the available memory.
MENU Menu – access the First Menu Screen .
MIN Minutes – used to define a logging interval.
MHz MHz – used to enter a frequency.
NO No – the current probe selection is incorrect.
Return to the menu to make another selection.
OFF Off – turn special mode off.
OK OK – continue with the same setting.
ON On – turn special mode on.
PAUSE Pause during data logging or time averaging.
QUIT Quit special mode and return to the standard
measurement screen.
RESTART Restart the probe selection and zeroing process.
RGT Right – set menus for right-handed operation .
SAVE Save the data point or the new setting.
SEC Seconds – used to define a logging interval.
SET Set the time, date, temperature, or display
contrast.
START Start averaging or data logging.
STNDS Standards – access the menu of available
exposure standards.
STOP Stop the current averaging run.
YES Yes – the current probe selection is correct.
Proceed with zeroing process.