NARDA 8718B, User Manual

Page: 49 / 137

48 Operating the Meter
13. Use the numeric keypad to enter a new two-digit
survey number and then press F1 ( OK ) or ENTER .
Again, make note of this number so that you can later
associate this survey number with the data points
collected. If you make a mistake, press F2 ( CLR ) to
clear the screen and enter a new survey number. The
meter will automatically return to the logged
measurements screen.
14. To end logging altogether and return to the standard
measurement screen, press F4 ( QUIT ). To initiate
logging again at a later point, use the menu system to
select DATA LOG from the First Menu Screen .
Mode 2 Logging
To initiate Mode 2 logging (a series of spatially-averaged
data points with a reference number assigned to each data
point)...
1. From the main data-logging screen, press the number 2
on the keypad to select LOG AVG WITH REF # from
the logging menu screen.
2. A screen will appear requesting that you assign a two-
digit survey number to this logging run of data points.
Use the numeric keypad to enter the two-digit number
and then press F1 ( OK ) or ENTER . Make note of this
number so that you can later associate this survey
number with the data points collected. If you make a
mistake, press F2 ( CLR ) to clear the screen and enter a
new survey number.
1 L O G W I T H R E F #
2 L O G A V G W I T H R E F #
3 C O N T I N U O U S L O G G I N G
M E M Q U I T
F1 F2 F3 F4