![background image](http://html.mh-extra.com/html/nanoentek/frend-system/frend-system_user-manual_704997042.webp)
42
13. Wait until the test is done automatically.
• The system automatically checks three steps while reading.
Step1.
Laser power
Step2.
Laser alignment
Step3.
Calculate ratio
14. When the test is done, the Q.C. Cartridge is ejected and the
results from each of the three steps are displayed.You will see three
Pass
es, if the system is properly operating.
FREND
TM
System
maintenance
Maintenance
Caution:
If you do not pass all tests, try again (11-14). But if you do not pass again, please contact
the Customer support.
Summary of Contents for Frend system
Page 1: ...System User manual ...