NAiS GV42C, Reference Manual, Page: 55 / 506

Chapter 1 Basic Operation
1-33
1
Ba
sic
Ope
ra
tio
n
of
th
e
Editor
8. [On-line Run]
This command becomes valid in on-line editing. When it is clicked, only the
screen data that has not been transferred yet is transferred to GV.
When an Item is Selected:
9. [Cut]
Same as [Cut] in the [Edit] menu
10. [Copy]
Same as [Copy] in the [Edit] menu When it is clicked, [Paste] becomes
active.
11. [Paste]
Same as [Paste] in the [Edit] menu
12. [Delete]
Same as [Delete] in the [Edit] menu
13. [Change All]
This command is used to change division numbers or processing cycles of
the parts placed on the screen at one time. Select the desired part, and click
this command. The [Change All] dialog is displayed.
[Change All Division No.]
When this item is checked, the division number can be specified. Specify
the division number to be changed for the selected part.
[Change All Process Cycle]
When this item is checked, the processing cycle can be selected. Select
the desired processing cycle. Clicking [OK] changes the processing
cycle of the selected part at one time.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com