NAiS GV42C Reference Manual Download Page 242

Page: 242 / 506

Chapter 4 Registration Items

4-68

6. When the dialog setting is concluded, click [OK]. The previous window is

displayed. Perform the same procedure for the next block number.

Copying and Pasting or Deleting Direct Blocks

Follow the procedure below to copy and paste or delete page blocks.

1. Click the block number to be copied or deleted.

2. The clicked line is highlighted entirely. Select [Copy] or [Delete] from the

[Edit] menu.

These commands can also be selected from the right-click menu.

To select multiple block numbers at one time, hold down the Shift key and click
top and bottom block numbers.

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Summary of Contents for GV42C



























































































































































































































































































































































































































































































































Search results

Summary of Contents for GV42C

Reviews:

NAiS GV42C, Reference Manual, Page: 242 / 506

Search results

Summary of Contents for GV42C

Reviews: