NAiS GV42C Reference Manual Download Page 11

Page: 11 / 506

[Notes on Maintenance and Operation]

•

Matsushita Electric Works , Ltd. is not responsible for any damages resulting from repair,

overhaul or modification of GV that was performed by an unauthorized person.

•

Do not use thinners for cleaning because they may discolor the GV surface. Use alcohol or

benzine commercially available.

•

Do not use a sharp-pointed tool when pressing a touch switch.

•

Only experts are authorized to set up the unit, connect the cables or perform maintenance and

inspection.

•

GV is equipped with a lithium battery. Lithium batteries contain combustible material such as

lithium or organic solvent. Mishandling may cause heat, explosion or ignition resulting in fire or

injury. Read this manual and related manuals carefully and handle the lithium battery correctly

as instructed.

•

If a data receive error occurs when GV and the counterpart (PLC, temperature controller, etc.)

are started at the same time, read the manual for the counterpart unit and handle the error

correctly.

•

Switch resolution of the GV series is determined by the

analog-type resistance film. Do not press two or more positions

on the screen at the same time.
If two or more positions are pressed at the same time, the switch

located between the pressed positions activates. Please take

note of this.

[Notes on Disposal]

•

At the time of disposal, GV must be treated as industrial waste.

CAUTION

SYSTEM

POWER

SWITCH

Pressing two positions at the same time

activates the switch in the center.

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Summary of Contents for GV42C



























































































































































































































































































































































































































































































































Search results

Summary of Contents for GV42C

Reviews:

NAiS GV42C, Reference Manual, Page: 11 / 506

Search results

Summary of Contents for GV42C

Reviews: