NAiS GV42C Reference Manual Download

Page: 469 / 506

Appendix 3 Part Editing

APP3-11

Editing

oced

es
for

ch
Part

7. Select the switch part. Click the [Change the Setting of a Part Placed] icon.

[Modify Part] window

8. The [Modify Part] window for the switch part is opened. Edit the part or

change its size.

“Switch Area” Setting

A switch part contains a “switch area.” Pressing here activates the switch. This area can

be moved in switch part editing. Select [Switch Area Setting] from the [Edit] menu. (Or,

right-click the mouse and select [Switch Area Setting] from the pop-up menu.)

The switch area can be moved to the desired position by dragging the mover tool.

Mover tool

The switch area is

moved to the position.

Drag the mover tool while

fitting it to the switch part.

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Summary of Contents for GV42C



























































































































































































































































































































































































































































































































Search results

Summary of Contents for GV42C

Reviews:

Related manuals for GV42C

Brands by name

Popular brands

NAiS GV42C, Reference Manual

Search results

Summary of Contents for GV42C

Reviews:

Related manuals for GV42C

Brands by name

Popular brands