NAiS GV42C Reference Manual Download Page 147

Page: 147 / 506

Chapter 3 Drawing Tools

3-13

Draw

ing
Methods

Arc and Sector

Click the [Arc] or [Sector] icon in the [Screen Drawing] dialog. The following
dialog is displayed.

Select the draw type.

Drawing from the Center

1. Select the left icon for the draw type.

2. Select the desired options for [Foreground] and [Line Type]. For sectors,

select the desired options for [ Paint], [ Frame], [Background], [Frame
Color] and [Tile].

3. Drag from the center to the desired radius.

4. When you stop dragging, a line is displayed. Click the mouse at the start

point of the arc or sector.

: Start point

: End point

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Summary of Contents for GV42C



























































































































































































































































































































































































































































































































Search results

Summary of Contents for GV42C

Reviews:

NAiS GV42C, Reference Manual, Page: 147 / 506

Search results

Summary of Contents for GV42C

Reviews: