NAiS GV42C Reference Manual Download Page 210

Page: 210 / 506

Chapter 4 Registration Items

4-36

[Display Change]

This command is valid only when alarm display in the sampling function is in
use. Selecting this command switches the display as the following:

The commands below are added to the [Display] menu.

[No.]

When this command is selected, line
numbers are displayed.

[Relay No.]

When this command is selected, the
allocation of memory used for alarm
display is displayed.

[Memorize]

Checked lines are stored in alarm
message history records. Unchecked
lines are not stored in history records.

[WAV]

When this command is selected, the
column that indicates settings with/without
sound output is displayed.

[WAV File No.]

When this command is selected, WAV file
numbers are displayed.

[Sound Priority]

When this command is selected, the order of precedence is displayed.

[E-Mail]

When this command is selected, the column that indicates settings
with/without e-mail is displayed.

Refer to Reference Manual (Function) for more information on the following:

For alarm display, see “Chapter 10 Sampling.” For sound output, see “Chapter 20 Sound.”

For e-mail, see “Chapter 27 E-Mail.”

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Summary of Contents for GV42C



























































































































































































































































































































































































































































































































Search results

Summary of Contents for GV42C

Reviews:

NAiS GV42C, Reference Manual, Page: 210 / 506

Search results

Summary of Contents for GV42C

Reviews: