NAiS GV42C Reference Manual Download

Page: 148 / 506

Chapter 3 Drawing Tools

3-14

5. Move the cursor along the arc to the end point of the arc. The section drawn

counter-clockwise remains as an arc.

6. Clicking the mouse draws the arc or sector.

Drawing from the Line End Position

1. Select the right icon for the draw type.

2. Select the desired options for [Foreground] and [Line Type]. For sectors,

select the desired options for [ Paint], [ Frame], [Background], [Frame
Color] and [Tile].

3. Drag the mouse from the start point to the end point.

4. When the mouse is released, the arc or sector is displayed.

5. Clicking the mouse to the desired position draws the arc or sector.

: Start point

: End point

Clockwise

Counter-clockwise

: Start point

: End point

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Summary of Contents for GV42C



























































































































































































































































































































































































































































































































Search results

Summary of Contents for GV42C

Reviews:

Related manuals for GV42C

Brands by name

Popular brands

NAiS GV42C, Reference Manual

Search results

Summary of Contents for GV42C

Reviews:

Related manuals for GV42C

Brands by name

Popular brands