NAiS GV42C, Reference Manual, Page: 500 / 506

Appendix 3 Part Editing
APP3-42
In a [Modify Part] Window
[File] Menu
• [Quit Part Modifying]
Clicking this command closes the [Modify Part] window and brings up the
former part edit window.
[Edit] Menu
The [Edit] menu commands are the same as those for screen data files, except
for the following commands.
• [Frame Auto Fitting]
When a graphic is too large to fit in the part area, click this icon to enlarge the
frame so that it fits the whole part including the graphic. The [Frame Auto Fit]
icon functions in the same manner. (This command is inactive for overlap
parts because graphics cannot extend beyond the part areas.)
• [Frame Manual Fitting]
The frame of a part can be adjusted manually using the mouse. For more
information, see page APP3-12.
• [Switch Area Setting]
This command is used to reset the switch area (operating area). For more
information, see page APP3-11.
• [Move Start/End Angles Separately]
This command is used to adjust pie graph or panel meter part angles. The
[Move start/end angles separately.] icon functions in the same manner. For
more information, see page APP3-20.
• [Symmetry Pie Graph]
This command is used to symmetrically adjust pie graph or panel meter part
angles. The [Symmetry] icon functions in the same manner. For more
information, see page APP3-21.
• [Same Start/End Angles]
This command is used to modify pie graph or panel meter part shape forming
a complete circle. The [Same Start/End Angles] icon functions in the same
manner. For more information, see page APP3-21.
• [With Internal Circle]
This command is used to add or delete an inner circle to or from a pie graph.
[With Internal Circle] icon functions in the same manner. For more
information, see page APP3-21.
• [Paint Position Setting] [Fit Area with Graphic]
This command is valid only for the closed area graph part. For more
information, see page APP3-28.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com