GB
NAD
7
12. SENSOR
Sensor for receiving the infra-red signals from your
remote handset. An LED in the Power On/Off button
will light when a signal is being received from the
remote handset.
REMOTE CONTROL HANDSET.
The Remote Control handset handles all the key
functions of the NAD 319 and has additional controls
to remotely operate NAD Tuners, Cassette and CD
machines. It will operate up to a distance of 16ft (5m).
Alkaline batteries are recommended for maximum
operating life. Two AA (R6) batteries should be fitted
in the battery compartment at the rear of the Remote
Control handset. When replacing batteries, check that
they have been put in the right way round, as indicat-
ed on the base of the battery compartment.
Please refer to previous sections of the manual for
a full description of individual functions.
Note: The remote control handset supplied is the
NAD universal remote and can be used on any
remote controllable NAD system. Not every function
on it may be available on your particular unit.
STANDBY Switches the NAD 319 between On and
Standby modes. (Caution: Switch the NAD 319 off
using the front panel Power switch when it is not
being used for long periods of time.)
MUTE Press the MUTE Button to temporarily switch
off the sound to the speakers and headphones. Mute
mode is indicated by the volume control LED flashing.
Press MUTE again to restore sound.
LD Inoperative for the NAD 319.
VCR1 Selects VIDEO as the active input.
AUX Selects the Aux as the active input.
PHONO Inoperative for the NAD 319.
CD Selects CD as the active input.
TUNER AM Selects Tuner input on the NAD 319 and
the AM waveband on a separate NAD Tuner.
TUNER FM Selects the Tuner input of the NAD 319
and the FM waveband on a separate NAD Tuner.
TAPE 2 Selects Tape 2 as the active input.
TAPE 1 Selects Tape 1 (Monitor) as the active input.
VOLUME
Increases or decreases the Volume
setting using the motorised front panel Volume con-
trol.
TUNER CONTROL (for use with NAD Tuner).
BANK. Selects a bank of preset stations.
PRESET
Selects preset stations.
TUNE
Operates the Manual Tune func-
tion.
SEARCH
Starts the Tuner Search function.
CD PLAYER CONTROL (for use with NAD CD
Player).
| |
Pause
Stop
Play
I
Skip back. Press once to return to start of
track, press several times to skip back to previous
tracks.
I
Skip forward to next track(s).
DISC
Go to next disc (for NAD CD changers).
CASSETTE DECK CONTROL (For use with
single [A] or double transport [A and B] NAD
Cassette Decks).
Forward Play or Reverse Play.
/ ||
Record Pause. Press to put cassette deck
into record-pause. Press Play to start recording.
Stops Play or Recording.
Rewind.
Fast Forward.
TROUBLESHOOTING.
NO SOUND
Power AC lead unplugged or power not switched on.
Check AC lead.
Tape 1 selected.
De-select Monitor mode.
Mute on.
Switch off Mute.
Rear Pre/power amp links not fitted correctly.
Fit links.
Internal fuse blown.
Consult dealer.
NO SOUND ONE CHANNEL
Balance control not centered.
Center Balance control.
Speaker not properly connected or damaged.
Check connections and speakers.
Input lead disconnected or damaged.
Check leads and connections.
WEAK BASS/ DIFFUSE STEREO IMAGE
Speakers wired out of phase.
Check connections to all speakers in the system.
Bridge Mode switched on with speakers connected
Switch 319 out of Bridged Mode.
for stereo operation
REMOTE CONTROL HANDSET NOT WORKING
Batteries flat, or incorrectly inserted.
Check or replace batteries.
IR transmitter or receiver windows obstructed.
Remove obstruction.
