NAT-MCH Clock-PCB – Technical Reference Manual
Version 1.4
© N.A.T. GmbH
36
11.3.10
Source Selection CLK1 Update Register
The value of the Source Selection CLK1 Update Register decides which output (of the PLL)
is connected to the Update CLK1 Transceiver.
Table 21:
SRC_SEL_CLK1_UD Register
Source Selection CLK1 Update – Address 0x09
Default value 0x00
Bit
7
6
5
4
3
2
1
0
Access
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Func -
-
-
SRC_SEL_CLK1_UD
Table 22:
SRC_SEL_CLK1_UD - Register Bits
Bit
Name
Function
[4..0] SRC_SEL_
CLK1_UD
Selects the output of the PLL which is connected to
CLK1 Update
0x01 – C19o
0x02 – #C16o
0x03 – C8/C32o
0x04 – #C4/C65o
0x05 – C2o
0x06 – C1.5o
0x07 – C3o
0x08 – C6/8.4/34/44o
0x09 – F16o
0x0B – PLL_REF0
0x0C – PLL_REF1
0x0D – EXTREF_IN
0x0E – TIC_100u
0x0F – RES (do not use!)
0x10 – RES (do not use!)
0x11 – SW_CLK
0x12 – SYNC_CLK
0x13 – 20MHz (stratum3)
0x14 – holdover
all other values result in no connection
[7..5] -
no function
write as 0 and ignore when read
The SRC_SEL_CLK1_UD bits in combination with the OUTSEL bits (refer to the PLL
Control 2 Register) set the frequency, which is transmitted to the second MCH.
