MyBinding Standard APC45 Programmable, Instruction Manual

Page: 44 / 54

36
4-2 Knife Angle Adjustment
Turn on the power switch.
- The indication [LOWER KNIFE] is shown on
the guide window.
Press the cutting buttons and keep
pressing until you hear a beeping
sound.
- The knife lowers and stops.
Turn off the power switch.
Loosen the lock screw.
- Insert an Allen wrench in the slot on the left
side cover of the machine and loosen the lock
screw.
Open the window for adjustment.
- Remove the mounting screw and open the
window.
- A hexagon hole can be seen through the win-
dow. This is the knife angle adjusting screw.
Adjust the knife angle.
- Adjust the direction and angle of the knife by
changing the position of the mark in the figure
below.
- The standard position is as shown in the fig-
ure below.
CAUTION
Loosen the lock screw only for one or two
turns. Do not remove it.
OFF
ON
LOWER KNIFE
Cutting Buttons
Allen Wrench
4 mm
(0.16”)
Lock
Screw
(Inside)
Window for
Adjustment
Mounting
Screw
Knife Angle
Adjusting Screw
Mark
The left side of
the knife lifts.
The left side of
the knife lowers.
St
andard
Posi
tion
View from the Opening