MyBinding Standard APC45 Programmable, Instruction Manual

Page: 39 / 54

31
Ch
eckin
g
the Coun
ter
O
per
ation
Pr
oced
ur
es
3-7 Checking the Counter
This section explains how to indicate the
frequency of the total cut since the
machine was new, or since the last knife
replacement.
Refer to the value for the knife replace-
ment.
Press the button.
Press the key of the numeric
keypad.
- The counter indicates the value for two sec-
onds.
2,000 times of cutting operation is used
as a target for knife replacement.
The knife condition depends on the type
of sheets to cut.
If prime condition of the knife, good fin-
ishing, or accurate trimming is required,
it is recommended to replace the knife
every 500 times of cutting operation.
C
510 / 2000
10050 TOTAL
KNIFE
How many times
the sheets are
cut since the
machine was
new.
How many times
the sheets are cut
since the last knife
replacement.
2,000: Reference
for replacing the
knife.