MyBinding Standard APC45 Programmable, Instruction Manual

Page: 30 / 54

22
3-5 Compression Operation
This section explains how to reduce the
bulk of the saddle-stitched booklets using
the pressure of the clamp.
Press the button.
- The LED on the upper left of the compression
operation button is illuminated and shows that
the “compression operation” is selected.
Move the backgauge to the front.
- Move the backgauge so that the spine of the
booklets can be placed under the clamp.
Place the swelled booklet.
- Place the booklet so that the spine touches
the backgauge.
Do not pile the narrow sheets high.
Place the sheets on the other side so that
the clamp does not incline widely.
Step on the foot pedal.
- Press the swelled part of the booklet by step-
ping on the foot pedal temporarily.
Press both cutting buttons.
- Only the clamp lowers and compresses the
bulk. (The knife does not lower.)
- The clamp still compresses the booklet after
the cutting buttons are released.
Press both cutting buttons again.
- The clamp lifts and the compression operation
is completed.
WARNING
This machine must be operated by just one
person at a time.
LED
CAUTION
Do not get on, or step on the foot
pedal with great force. The machine
may be damaged.
The clamp lowers.
The clamp presses.
The clamp lifts.