manualshive.com logo in svg

MUTOH VJ-2638, Operation Manual

Share
Download
MUTOH VJ-2638 Operation Manual Download Page 75

VJ-2638/1638/1638W OPERATION MANUAL

Before using

3.3  Filling ink

49

9. Remove Cleaning fluid pack and IC chip card  from High-capacity ink pack adapter.

NOTE

• When there is remaining Cleaning fluid pack and IC chip card, clarify the corresponding pack and 

card, and store it as a set.

10. Install Ink pack and IC chip card to High-capacity ink pack adapter.

11. Install High-capacity ink pack adapters (K, C, M, Y: 2 each) in Ink cartridge slots (K, C, M, Y: 2 

each) on the back of the printer.

•

Shake High-capacity ink pack adapter 2 to 3 times lightly before installing it in Ink cartridge slot.

•

Make sure that Ink packs are inserted into the correct Slots.
Match the ink color label with the ink color before inserting Ink pack.

NOTE

• Do not insert High-capacity ink pack adapter into Ink cartridge slot without attaching Ink pack.

The information of the remaining IC chip card will be rewritten and Ink pack will not be usable.

No.

Name

1

High-capacity ink pack adapter

2

Ink cartridge slots

3

Ink color labels

1

2

3

Summary of Contents for VJ-2638















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands