manualshive.com logo in svg

MUTOH VJ-2638, Operation Manual

Share
Download
MUTOH VJ-2638 Operation Manual Download Page 167

VJ-2638/1638/1638W OPERATION MANUAL

Handling the printer

4.2  Media

141

9. Sets up Micro Adjustment Change.

a. Press the [+] key or [-] key on Operation panel to select "PF5: Micro Change".

b. Press the [Enter] key on Operation panel.

•

"Micro Change: 0.00%" is displayed on Operation panel.

c. Press the [+] key or [–] key and enter the micro adjustment value according to the printing result 

in Step 7.
The optimal adjusted value has the least white lines or overlapping images. Use the number on 
the bottom right of the printing result as the adjusted value.

d. Press the [Enter] key on Operation panel.

•

•The micro adjustment value is saved.

•

"PF5:Micro Change" is displayed on Operation panel.

10. Press the [Menu] key on Operation panel.

•

Operation panel returns to Normal.

•

The adjustment of media feed compensation value is complete.

Summary of Contents for VJ-2638















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands