manualshive.com logo in svg

MUTOH VJ-2638, Operation Manual

Share
Download
MUTOH VJ-2638 Operation Manual Download Page 225

VJ-2638/1638/1638W OPERATION MANUAL

Panel setup menu

5.1  Setup menu

199

5.1.15.2 Printing Mode Auto Cleaning

Set the auto cleaning interval during printing.

5.1.15.3 Pre-printing Mode Auto Cleaning

Set the value for auto cleaning before printing.

5.1.16 Ink Status menu

Displays various information of IC chips.

NOTE

• To display various information of IC chips, use genuine ink and S/C cards.

If Ink cartridges other than genuine Ink cartridges are used, ink status will not be displayed 
correctly.

Setup item

Setting

Description

PrintingTime

<Off> to 5 mins to 180 mins

Selects the time for auto cleaning while printing.
• Off: Auto cleaning is not performed.
• Others: Perform the head cleaning selected in the Cleaning 

menu after the setting time has elapsed.

6.2.3 Head cleaning

—

• [Enter] key: saves the setting and shifts to the previous 

menu.

• [Cancel] key: cancels the setting and shifts to the previous 

menu.

5.1.15 Auto Cleaning menu

Setup item

Setting

Description

Before Print

<Off>

The auto cleaning is not performed.

On

• Perform the head cleaning selected in the Cleaning menu 

before printing.

6.2.3 Head cleaning

—

• [Enter] key: saves the setting and shifts to the previous 

menu.

• [Cancel] key: cancels the setting and shifts to the previous 

menu.

5.1.15 Auto Cleaning menu

Setup item

Setting

Description

KkCcMmYy

0 to 100 (unit: %)

The amount of ink remaining in each Ink cartridge of K/C/M/
Y is displayed.

—

• [Cancel] key: shifts to the previous menu.

5.1 Setup menu

Summary of Contents for VJ-2638















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands