MUTOH VJ-2638, Operation Manual

Page: 311 / 334

VJ-2638/1638/1638W OPERATION MANUAL Troubleshooting
7.2 Error messages 285
7.2.2 Message type error display and remedies
This section describes message type errors and remedies.
Message type errors are displayed when certain failures occur during printer operation.
If a message type error occurs, the printer may display the following error messages on Operation panel
and stop operation.
If the printer stops operating, solve the error so that the printer restarts.
NOTE
When an error occurs in the color measuring mode (numbers 26 to 38 below), clear the error and
then press the [Cancel] key more than two seconds to solve the message type error.
17 Power Off Turning the printer off.
Please wait a while.
Do not unplug Power cord set till Operation
panel is turned off.
3.2.2 Turning
the power OFF
18 Change Head Gap Low Displayed in the following cases.
• During power shutdown
• Before head cleaning
Set the head height to Low.
4.2.5.3 When
setting the head
height to Low
19 Change Head Gap High Set the head height to High.
Starts printing.
4.2.5.2 When
setting the head
height to High
20 Insert CleaningCart. Washing Print head.
Install Cleaning cartridge.
3.3 Filling ink
21 Insert InkCartridges Filling the ink.
Insert Ink cartridge.
3.3 Filling ink
22 User: Type ** OK? Initializing the media.
Please wait a while.
(** represents the set User type.)
3.4.3 Setting
the User Type
Setting
23 Media Initial
No. Display Description Remedy Reference
1 Cover Open Front cover is open. Close Front cover.
3.4 Loading
media
2 Mainte.CoverL Open Left Maintenance cover is
open. Close Maintenance cover.
2.2 Names of
parts and
functions
3 Mainte.CoverR Open Right Maintenance cover is
open. Close Maintenance cover.
2.2 Names of
parts and
functions
4 Lower the lever Media loading lever is raised. Lower Media loading lever.
2.2 Names of
parts and
functions
No. Display Description Reference