MUTOH VJ-2638 Operation Manual Download Page 269

Page: 269 / 334

VJ-2638/1638/1638W OPERATION MANUAL

Maintenance

6.1 Replacing consumable components

243

6. Remove Cutter.

CAUTION

• Do not touch the blade edge.

It may cause an injury.

• Do not touch the cutter blade edge with a hard substance or drop Cutter.

Cutter blade may be damaged or chipped.

NOTE

• Used Cutter should be put in a plastic bag, etc, and dispose of it in compliance with local ordinance

and instructions of local authorities.

7. Install a new Cutter as illustrated.

NOTE

• Make sure that the spring in Cutter holder does not fly out while installing.

No.

Name

Razor blade

Summary of Contents for VJ-2638















































































































































































































































































































































Search results

Summary of Contents for VJ-2638

Reviews:

Brands by name

Popular brands

MUTOH VJ-2638, Operation Manual

Search results

Summary of Contents for VJ-2638

Reviews:

Brands by name

Popular brands