MUTOH VJ-2638 Operation Manual Download Page 105

Page: 105 / 334

VJ-2638/1638/1638W OPERATION MANUAL

Before using

3.5 Test print

8. Open the maintenance cover on the left of the printer.

•

"Remove connector cap and attach instrument [ENTER]" is displayed on the operation
panel.

NOTE

• When a certain time has passed without opening the maintenance cover, the print head returns

toward the right side of the printer to protect the print head. "Attaching instrument [ENTER]" is
displayed. Restart from the Step 8.

9. Firmly pinch the tabs on both sides of the connector cap with your fingers, pull the connector cap

forward to remove it from the print head.

No.

Name

Maintenance Cover

No.

Name

Connector cap

Tabs

Print head section

Summary of Contents for VJ-2638















































































































































































































































































































































Search results

Summary of Contents for VJ-2638

Reviews:

Brands by name

Popular brands

MUTOH VJ-2638, Operation Manual

Search results

Summary of Contents for VJ-2638

Reviews:

Brands by name

Popular brands