MUTOH VJ-2638 Operation Manual Download Page 108

Page: 108 / 334

Before using

VJ-2638/1638/1638W OPERATION MANUAL

3.5 Test print

14. When "Start measurement [ENTER]" is displayed on the operation panel, press the [Enter] key.

•

Spectrophotometer starts measuring the color patches.

•

"Measuring..." is displayed on the operation panel.

•

After measuring is complete, "Detaching instrument [ENTER]" is displayed on the operation
panel.

NOTE

• Do not open the covers or move media loading lever during measuring.

15. Press the [Enter] key.

•

"Wait for a while..." is displayed on the operation panel.

•

The print head moves to the left.

•

"Open left mainte. cover." is displayed on the operation panel.

Summary of Contents for VJ-2638















































































































































































































































































































































Search results

Summary of Contents for VJ-2638

Reviews:

Brands by name

Popular brands

MUTOH VJ-2638, Operation Manual

Search results

Summary of Contents for VJ-2638

Reviews:

Brands by name

Popular brands