manualshive.com logo in svg

Murphy Selectronic TTD Series, Installation And Operation Manual, Page: 17 / 58

Share
Download
Murphy Selectronic TTD Series Installation And Operation Manual Download Page 17

 

Section 50 

 

00-02-0329 

01-09-07 - 

13 -

 

Front Panel Key Functionality 

 

The operator can interface with the TTD Annunciator in one of two ways. One is via the Front 
Panel keypad.  The second way an operator can interface is with the Murphy MConfig 
software. This provides the user with a Template displaying the TTD Annunciator setup and 
status by reading the Modbus registers. Setup selections can be made and the configuration 
saved to file for future reference. The software is free and can be downloaded from 
www.fwmurphy.com 

TTD Keypad Features 

NOTE:

  Because the keys have more than one function depending on the 

operational mode the system is in at the time, the following TTD Keypad 
Functionality blocks indicate the keypad action seen if that key is pressed. 

The 

LOW BATT

 icon can show in any mode if the battery charge is low. 

To order call 1-800-548-1191 or visit www.partdeal.com - [email protected]

Summary of Contents for Selectronic TTD Series



























































Reviews:

No comments