Murphy PowerCore MGC1000, Operation Manual

Page: 35 / 48

Software Release: [TBD]
Section 40 35 00-02-1167
2018-09-18
14 = Energize to Stop Delay
15 = Engine Spindown Delay
16 = Wait to Start Delay
40008 Read Only Active Shutdown Status (Active Fault: Bit = 1, Inactive: Bit = 0)
0 = Overspeed SD (0 or 1)
1 = Underspeed SD (0 or 1)
2 = Overcrank SD (0 or 1)
3 = Low Oil Pressure SD (0 or 1)
4 = High Engine Temp SD (0 or 1)
5 = Low Fuel SD (0 or 1)
6 = Low Discharge Pressure SD (0 or 1)
7 = High Discharge Pressure SD (0 or 1)
8 = Speed Signal Lost SD (0 or 1)
9 = Low Lube Level SD (0 or 1)
10 = Fuel Leak SD (0 or 1)
11 = Fuel Filter Restriction SD (0 or 1)
12 = Reserved Reserved
13 = Reserved Reserved
14 = Reserved Reserved
15 = Remote Stop SD (0 or 1)
40009 Read Only Active Shutdown Status (Active Fault: Bit = 1, Inactive: Bit = 0)
0 = Coolant Level SD (0 or 1)
1 = High Level SD (0 or 1)
2 = Low Level SD (0 or 1)
3 = High Flow SD (0 or 1)
4 = Low Flow SD (0 or 1)
5 = Reserved Reserved
6 = Reserved Reserved
7 = Water in Fuel SD (0 or 1)
8 = Low Suction SD (0 or 1)
9 = High Suction SD (0 or 1)
10 = Reserved Reserved
11 = High Engine Oil Temp SD (0 or 1)
12 = Low Gear Box Pressure SD (0 or 1)
13 = High Gear Box Pressure SD (0 or 1)
14 = Reserved Reserved
15 = Red Lamp Status (0 or 1)
40010 Read Only Active Shutdown Status (Active Fault: Bit = 1, Inactive: Bit = 0)
0 = Pivot Alignment SD (0 or 1)
1 = Reserved Reserved
2 = Reserved Reserved
3 = Reserved Reserved
4 = Reserved Reserved
5 = Reserved Reserved
6 = Reserved Reserved
7 = Reserved Reserved
8 = Reserved Reserved
9 = Reserved Reserved