MU-M4SOL
User’s Manual
Page 49 of 130
6.
Tap
Save
to save the test results in a report format. Following generation of the report,
tap
Download
to copy the report to a disk-on-
key attached to the tester’s USB port
. File is
created into PDF automatically.
7.
To perform the Sweep test, return to the HDMI Cable Tester page appears as shown in the
figure below.
Figure 60: Run Sweep Tests
8.
Check the
Sweep
box and tap
Run
.
NOTE
In this description, the Compatibility and Sweep tests are presented separately. You can check
both
the
Compatibility
and
Sweep
boxes to run the two tests simultaneously.
9.
The
MU-M4SOL
begins to test the quality of each of the wires in the cable. If needed, tap
Run
to perform another Sweep test.
The existence of each wire tested is indicated by a color, as listed in the table below:
Table 6: Wire Quality Color Code
Color Severity
Wire exists
Wire is missing
Wire is shorted
Test in progress
The figure below shows the sweep test in progress. If necessary, you can tap
Stop
to cancel the test.
Summary of Contents for MU-M4SOL
Page 1: ...Test Device Model MU M4SOL User s Manual Revision A16 ...
Page 39: ...MU M4SOL User s Manual Page 39 of 130 Figure 45 Log Report ...
Page 68: ...MU M4SOL User s Manual Page 68 of 130 Figure 83 Information Menu ...
Page 108: ...MU M4SOL User s Manual Page 108 of 130 Figure 134 IP Module report ...
