Murideo MU-M4SOL, User Manual

Page: 31 / 130

MU-M4SOL
User’s Manual
Page 31 of 130
3. To save EDID data to the tester internal memory, tap the Save button.
To download EDID data, connect the USB memory stick and tap the Download button.
Two files will be saved – EDIDXXXX.txt and EDIDXXXX.bin .
4. To delete EDID data from tester, select the files to delete and tap the Delete button.
4.2.4.3 Certification Report
The certification report menu provides the following capabilities:
◼
Run Certification – report data generation
◼
Report Files – saves the report data from the tester to the USB memory stick
◼
Cable Profile – Cable profile configuration
4.2.4.3.1 Run Certification
The HDBaseT report data collection feature is used to collect the data required to perform HDBaseT
cable analysis.
To access data for HDBaseT cable analysis:
Connect the
MU-M4SOL
test device to both ends of the CATx cable, as shown below in
Figure 33:
◼ The HDMI cable must be connected to the Internal Generator to ensure that HDMI
traffic is running on the HDBaseT link.
◼ The “local” side of the cable is connected to either the transmitter or receiver module,
housed in the
MU-M4SOL
chassis.
◼ The “remote” side of the cable is connected to the other
MU-M4SOL
module.
Make sure that the remote module is terminated by a Pluggable POH Adapter as
shown below.
Figure 33: Cable Test Setup
HDBaseT
HDMI