Murideo MU-M4SOL, User Manual

Page: 11 / 130

Murideo | MSolutions
User’s Manual
Page 11 of 130
2.2 Models
The
MU-M4SOL
HDBaseT Test Device is supplied in a variety of models and add-on modules:
Table 1:
MU-M4SOL
Models
Model Description
MS103TDs HDBaseT tester main unit with 3.5" touch display, built-in HDMI pattern
generator, and Wi-Fi connection for smart devices
MS104B Battery based HDBaseT tester main unit with 3.5" touch display, built-in
HDMI pattern generator, and Wi-Fi connection for smart devices
Table 2:
MU-M4SOL
Modules
Model Description
Standard Modules
HDBaseT Spec 1.0
Transmitter and Receiver
Modules The
MU-M4SOL
HDBaseT Test Device is supplied with HDBaseT Spec 1.0-
standard Tx and Rx modules.
Optional Add-On Modules
HDBaseT Spec 2.0
Transmitter and Receiver
Modules The HDBaseT Spec 2.0 Modules (Tx and Rx units) are available as an
optional add-on that can be used with any of the test devices listed in
Table 1 above.
DCR Module The DC Resistance feature enables installers and integrators to check DC
resistance unbalance easily and reliably
– both within and between
twisted pairs – ensuring system integrity in even the most advanced,
high-powered Power-over-HDBaseT systems.
HCT Module The HDMI Cable Tester module allows installers and integrators to test
the quality of HDMI cables before their installation. The module
identifies missing and shorted wires in HDMI cable that will render the
cable incapable of 4K streaming.
Looper Module The Looper module is a remote-end module with RJ45 and HDMI ports
that is used to create the loop at the other end for DC Resistance and
HDMI cable testing.