Murideo MU-M4SOL, User Manual

Page: 18 / 130

MU-M4SOL
User’s Manual
Page 18 of 130
4. Insert the 48 VDC power supply connector into the designated socket in the main unit to
power the device.
NOTE
The device will not power up unless a local module has been inserted into the lower slot of the
device.
Figure 14: MS103TDs and MS104B Input Powering Sockets
4.1.2 Connection to System Under Test (SUT)
Use the following guidelines to connect the
MU-M4SOL
to an HDBaseT source device (i.e.
an HDBaseT transmitter such as Matrix or Blu-ray). The
MU-M4SOL
acts as a sink device.
To test an HDBaseT source device:
Insert the receiver module into the
MU-M4SOL
main unit in the lower slot – the module
will be defined as the local module.
Using a CATx cable, connect the HDBaseT input port of the receiver module to the output
port source device, using one of the following methods:
◼
Connecting the CATx cable directly to an integrated or 3
rd
party HDBaseT output port
in the source device.
◼ Connecting the CATx cable to the
MU-M4SOL
transmitter module and connecting the
transmitter module to the source device with an HDMI cable.
Insert the 48 VDC power supply connector into the designated socket in the main unit to
power the device.
Use the following guidelines to connect the
MU-M4SOL
to an HDBaseT sink device (i.e. an
HDBaseT or HDMI receiver such as a display). The
MU-M4SOL
acts as a source device.
To test an HDBaseT sink device:
Insert the transmitter module into the
MU-M4SOL
main unit in the lower slot – the module
will be defined as the local module.
Using a CATx cable, connect the HDBaseT output port of the transmitter module to the
input port sink device, using one of the following methods:
◼ Connecting the CATx cable directly to an integrated HDBaseT input port in the sink
device.