MU-M4SOL
User’s Manual
Page 76 of 130
The Tx configuration screen appears as shown in the figure below:
Figure 93: Tx Configuration Screen
The remote and local HDBaseT transceivers are identified
–
as either transmitter or receiver
–
and
displayed at the top of the page.
NOTE
The system correctly identifies the local and remote transceivers
–
even when both are transmitters, or both
are receivers.
Tap on either the local or the remote entity to display configuration information (read only):
◼
FW Ver.
The HDBaseT chip
’s firmware version.
◼
Pixel Clock.
The clock frequency of the video transmission. The Pixel Clock values in the
receiver and transmitter screens should be similar.
◼
Chip Class.
Class of HDBaseT chip, according to the HDBaseT Standard.
◼
Chip Type.
The chip model/part number.
◼
Supported System Features.
The interfaces that are extended by the chip over the HDBaseT
link, such as: Ethernet, RS232, IR (Infrared support provided by the chip).
◼
Link Status.
HDBaseT or No link.
◼
System Mode.
Specifies whether Operating Mode changes are performed automatically or
manually.
◼
Operating Mode.
Current HDBaseT operating mode
–
HDBaseT, LPPF1/2, Disconnect, FB
(Ethernet Fallback), or Bypass Mode.
HDCP
Indicator
Summary of Contents for MU-M4SOL
Page 1: ...Test Device Model MU M4SOL User s Manual Revision A16 ...
Page 39: ...MU M4SOL User s Manual Page 39 of 130 Figure 45 Log Report ...
Page 68: ...MU M4SOL User s Manual Page 68 of 130 Figure 83 Information Menu ...
Page 108: ...MU M4SOL User s Manual Page 108 of 130 Figure 134 IP Module report ...
