Muratec F-65 Operating Instructions Manual Download

Page: 91 / 114

3.3

Just in case …

Remove the ink film cartridge by
grabbing the handles on each
side of the cartridge and lifting
it straight up out of the
machine.

Note: The diagram (right)

shows a view from the
left side of the machine.

Gently pull the jammed printout
up and out.

Hold the cartridge over your fax
machine. Position the cartridge so
that its arrow mark is over the
machine’s arrow mark. (The supply
roll should be in the front of the
machine.)

Gently put the cartridge back into
the fax machine. If positioned cor-
rectly, it will “drop” in smoothly.

Important: Your fax machine will

not work if the car-
tridge is not inserted
properly.

Gently close the top cover, pressing
firmly on both sides of it until you
hear it click.

Important: Your fax machine will

not work if the top
cover is not closed
properly.

Summary of Contents for F-65



















































































































Search results

Summary of Contents for F-65

Reviews:

Related manuals for F-65

Brands by name

Popular brands

Muratec F-65, Operating Instructions Manual

Search results

Summary of Contents for F-65

Reviews:

Related manuals for F-65

Brands by name

Popular brands