Muratec F-65 Page 67 Operating Instructions Manual Download

Page: 67 / 114

Note: If you make a mistake or want to erase previously entered numbers,

press

CANCEL

to erase to the left. Or to change just one character in

the number, press

to move the cursor to the left, or

to move it to

the right, to that character. Press

CANCEL

to erase it. Then re-enter

until the number is just as you want it.

Use the numeric keypad to enter up to 120 fax numbers. These can be any
combination of other one-touch keys, speed-dial numbers and numbers you
enter with the numeric keypad.

Important: Do not press

ENTER

Between each number, press

COM

OPTIONS

ENTER

to enter a comma.

Important: Do not insert a comma after the last number.

Your display can show only 16 characters at a time. To view characters beyond
those 16, press

to scroll to the left or

to scroll to the right.

Note: If you make a mistake or want to erase previously entered numbers,

press

CANCEL

to erase to the left. Or to change just one character in

the number, press

to move the cursor to the left, or

to move it to

the right, to that character and press

CANCEL

to erase it. Then re-

enter until the number is just as you want it.

Now, while you still can see the fax number on the

LCD

, press

COM

OPTIONS

four times. The

LCD

shows:

press

ENTER

. The

LCD

shows:

If you want the polling to begin immediately every time you press the key,
press

ENTER

and skip to step 13.

If you want to delay the polling, press

COM

OPTIONS

COM

OPTIONS

ENTER

Instruct your fax to carry out this delayed command in one of the following
ways:

Option 1:

Perform the command once at a certain time on a certain day of
the month. (For example, “Do this at 5:05

on the 30th.”)

To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:

Option 2:

Perform the command at a certain time each day you press the
key. (For example, “Do this at 5:05

today.”)

To select this option, use the numeric keypad to enter 0, 0 (i. e.,
00), and then the time when the fax could perform the command:

Press

ENTER

The

LCD

now displays the next programmable one-touch key.

If you do not want to enter or change any other key’s programming, press

STOP

to return your machine to standby mode.
If you do want to enter or change another key’s programming, go back to step
4.

Programming an

-code transmission

Note: To erase a programmable one-touch key, refer to page 2.36.

Note: For

-code transmission to occur, three things must be true:

• The remote fax machine must support

ITU

subaddress (and password)

capabilities.

• A mailbox(

-code box) with an

ITU

subaddress must exist on the remote

fax. (It does not have to have a

ITU

password.) If the other machine does-

n’t have at least one box with a subaddress,

-code communication will be

impossible.

• You must know the

ITU

subaddress and (if applicable) password informa-

tion for the mailbox (

-code box) on the remote machine.

To program an

-code transmission into a programmable one-touch key:

Press

PROGRAM

, 1. The

LCD

shows:

Enter P OneTouch

Time: 00/17:05

Time: 30/17:05

Polling

4.Polling

9-555-0692,A,S01

Beyond the basics

2.32

Summary of Contents for F-65



















































































































Search results

Summary of Contents for F-65

Reviews:

Related manuals for F-65

Brands by name

Popular brands

Muratec F-65, Operating Instructions Manual

Search results

Summary of Contents for F-65

Reviews:

Related manuals for F-65

Brands by name

Popular brands