Muratec F-65 Operating Instructions Manual Download Page 62

Page: 62 / 114

Beyond the basics

2.27

Press

ENTER

. The

LCD

shows briefly:

then it will show:

Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press

START

What you do now depends upon when you want the transmission to begin.
• To have it begin now, skip to step 11.
• To delay it, proceed to step 9.

Press

COM

OPTIONS

COM

OPTIONS

ENTER

The

LCD

shows the current day and time:

Use the numeric keypad to enter the day and time when the transmission
should begin, then press

ENTER

Note: If you make a mistake, press

to move the cursor to the left, or

move it to the right, to that character. Then re-enter until the number
is just as you want it.

Press

START

If you chose an immediate transmission in step 8, your fax machine will begin
dialing. If you chose a delayed command, the machine will display
“

** Reserved **

” on the

LCD

, indicating that the machine has stored the

command in memory and will perform it later.

Note: The

ITU

subaddress and password can be up to 20 characters in length and

can include any combination of numbers and the * and # symbols. Do not

include other non-numerical characters).

Note: To change a number you have already entered:

—

Press

to move the cursor to the left or

to move it to the right, to

that character.

—

Press

CANCEL

to erase the character.

—

Enter the digit(s) you want.

Time : 15/17:05

Enter Fax Number

Summary of Contents for F-65



















































































































Search results

Summary of Contents for F-65

Reviews:

Brands by name

Popular brands

Muratec F-65, Operating Instructions Manual

Search results

Summary of Contents for F-65

Reviews:

Brands by name

Popular brands