Muratec F-320, Operating Instructions Manual

Page: 90 / 142

Advanced features
13
The
LCD
asks which document mode you want each time you use this pro-
grammable one-touch number.
14
Press or until the mode you want appears.
Note: For any of the following settings, choosing “---” tells the machine to
use its default setting for this programmable one-touch key.
15
Press
ENTER
. The
LCD
asks which contrast mode you want each time you use
this programmable one-touch number.
16
Press or until the mode you want appears.
17
Press
ENTER
. The
LCD
asks if you want the Fax & Copy feature on or off each
time you use this programmable one-touch number.
18
Press or until the mode you want appears.
19
Press
ENTER
.
20
Press
STOP
to return your machine to standby mode.
Fax dialing with programmable one-touch
To dial a fax call using a programmable one-touch number:
1
Set your document in the
ADF
.
2
Make any necessary adjustments as usual.
3
Press the programmable one-touch key in which you’ve stored the fax commu-
nication command.
Your fax will perform the operation now, or at whatever time you programmed.
Note: To review the details of each operation, review the instructions for that
operation. See page 3.33 for a list of each operation and where to find it.
If you programmed this key to delay its operation, the
LCD
shows:
If you programmed this key to perform the operation immediately after you press it,
the
LCD
shows the number:
Printing a list of your programmable one-touch keys
You fax machine can print a list of the commands you’ve stored in your programma-
ble one-touch keys.
The list includes:
(1) each key’s one-touch number
(2) the fax/telephone number
(3) when the command should start
(4) which command you’ve selected
(5) if applicable, the selected call group(s) or F-Code box(es) you’ve stored in
the key
(6) the individual settings for each key
To print a list of programmable one-touch keys, press
MENU
, 5, 1, 1, 1,
ENTER
.
Erasing a programmable one-touch key
1
Press
MENU
, 3, 4, 2. The
LCD
shows:
2
Select the programmable one-touch key you want to erase.
Note: You can select the programmable one-touch key by pressing that key
on the control panel.
3
Press
ENTER
. The following two displays will appear alternately:
Important: If you want to quit without erasing the one-touch number
you’ve selected, press
CANCEL
. The fax will return to step 2.
4
Press
ENTER
to erase the number.
To erase another program one-touch number, repeat steps 2–4. Or press
STOP
to
return to standby mode.
57:Erase P One-Touch
No
→ →
Cancel
57:Erase P One-Touch
Yes
→ →
Enter
Select Program No.
57:Delayed
9-1-972-555-4335
A4 Normal
** Reserved **
Jan 29 2002 5:17pm
Fax & Copy :---
$ $
/
# #
/Enter
Contrast :-------
$ $
/
# #
/Enter
Document Mode:------
$ $
/
# #
/Enter
3.41