Muratec F-320 Operating Instructions Manual Download

Page: 31 / 142

1.20

Getting started

Press

ENTER

. The

LCD

will show:

If you do not want to enter TTI 3, press

ENTER

and skip to step 26.

Use the numeric keypad to enter characters for TTI 3.

Press

ENTER

to save the setting and continue.

The

LCD

now asks you to set the usual TTI which will appear usually at the

top of faxes you send.

Press

until desired TTI appears.

Press

ENTER

to save the setting and continue.

The

LCD

now asks you to enter the time for the sleep mode. Your machine will

automatically enter sleep mode after your selected idle time has elapsed.

Enter the time (in minutes) using the numeric keypad.

Press

ENTER

to save the setting. Your machine will return to standby mode.

Sleep Mode Timing
(001-240) 005 min.

Usual TTI :TTI 1

/Enter

TTI 3 ;Upper
_

Summary of Contents for F-320















































































































































Search results

Summary of Contents for F-320

Reviews:

Related manuals for F-320

Brands by name

Popular brands

Muratec F-320, Operating Instructions Manual

Search results

Summary of Contents for F-320

Reviews:

Related manuals for F-320

Brands by name

Popular brands