manualshive.com logo in svg

Multitech ProxyServer MTPSR3-200, User Manual, Page: 86 / 130

Share
Download
Multitech ProxyServer MTPSR3-200 User Manual Download Page 86

ProxyServer User Guide

MTPSR3-200

86

ProxyServer Configuration

The ProxyServer Configuration option allows you to view and change parameters on the protocol
stacks, high and low level device drivers, enable or disable the supported servers, configure Mux
data ports, set up filtering and priority, or view system information.

To select an option, enter the number of the option and hit the Enter key. For example, to select the
Protocol Stacks option, type 1 <Enter>. For details on a parameter, refer to the on-line helps.

Remote User Database

The Remote User Database option from the ProxyServer management menu allows you to add and
configure a list of users who will access the ProxyServer remotely.  After selecting Remote User
Database (type 2 <Enter>) from the main menu, type A <Enter> to add a new user to the database.
The following list of options is displayed:

By selecting and configuring the various options and entering the desired information, you can
construct a database of remote users for the ProxyServer.  For a detailed description of each option,
refer to the on-line Help provided in your ProxyServer software.

Summary of Contents for ProxyServer MTPSR3-200



































































































































Reviews:

No comments