manualshive.com logo in svg

Multitech ProxyServer MTPSR3-200, User Manual, Page: 12 / 130

Share
Download
Multitech ProxyServer MTPSR3-200 User Manual Download Page 12

ProxyServer User Guide

MTPSR3-200

12

Introduction

This chapter describes how to unpack and cable your ProxyServer. The unpacking section describes
the contents of the shipping box and the installation procedure describes each cable connection and
shows where that cable is connected to the ProxyServer.

Unpacking

The shipping box contains:

•

ProxyServer (1)

•

Quick Start Guide (1)

•

ProxyServer CD with the ProxyServer Software and User Guide in Adobe Acrobat

TM

 format

(1)

•

RJ-11 to phone jack cables (3)

•

external power supply (1)

•

RJ-45 to DB-9 Command Port cable (1)

Inspect the contents for signs of any shipping damage. If damage is observed, do not power up the
unit, contact Multi-Tech’s Technical Support for advice (refer to 

Chapter 9

). If no damage is observed,

place the ProxyServer in its final location and perform the cabling procedures that follow.

Save the shipping box in case reshipment is necessary.

MADE IN U.S.A

MADE IN U.S.A

www

.multitech.com

Figure 2-1. Unpacking

Summary of Contents for ProxyServer MTPSR3-200



































































































































Reviews:

No comments