manualshive.com logo in svg

Multitech ProxyServer MTPSR3-200, User Manual, Page: 18 / 130

Share
Download
Multitech ProxyServer MTPSR3-200 User Manual Download Page 18

ProxyServer User Guide

MTPSR3-200

18

8.

The Setup Complete dialog box is displayed.

Click Finish to continue.

9.

The “Do you want to download wizard setup?” screen is displayed.

The Wizard Setup screens enable you to input basic configuration information needed to
configure your ProxyServer. These screens guide you through the process of entering your LAN
address, net mask information and your WAN, DHCP Server, and Domain Name Server entries.
All  entries  display in their respective dialog boxes when accessed from the Main menu.

Click Yes to download the wizard setup; clicking No takes you to the program group (icons)
where you can choose any of eight ProxyServer utility programs.

10. If you are configuring your ProxyServer over the network, the IP Address Reconfiguration

dialog box is displayed showing the default IP and MAC addresses of all detected ProxyServers
in the top window and a suggested IP Address in the lower window.

From the top window, select the ProxyServer you want to configure, then verify the Suggested IP
Address in the lower window.

The IP Address is only a proposed address. You must verify that this suggested address does
not conflict with the IP address of any other device currently on your network. If an address
conflict exists, change the contents of this field to assign a unique address to your ProxyServer.
Click OK when you are ready to continue.

Summary of Contents for ProxyServer MTPSR3-200



































































































































Reviews:

No comments