Multitech MultiVOIP 400, User Manual

Page: 73 / 88

73
Appendix C - Regulatory Information
3. An FCC-compliant telephone cord with modular plug is provided with this equipment. This
equipment is designed to be connected to the phone network or premises wiring using a compatible
modular jack which is Part 68 compliant. See installation instructions for details.
4. If this equipment causes harm to the phone network, the phone company will notify you in advance
that temporary discontinuance of service may be required. But if advance notice is not practical, the
phone company will notify the customer as soon as possible. Also, you will be advised of your right to
file a complaint with the FCC if you believe it is necessary.
5. The phone company may make changes in its facilities, equipment, operations, or procedures that
could affect the operation of the equipment. If this happens, the phone company will provide advance
notice in order for you to make necessary modifications in order to maintain uninterrupted service.
6. If trouble is experienced with this equipment (the model of which is indicated below) please contact
Multi-Tech Systems, Inc., at the address shown below for details of how to have repairs made. If the
equipment is causing harm to the network, the phone company may request that you remove the
equipment from the network until the problem is resolved.
7. No repairs are to be made by you. Repairs are to be made only by Multi-Tech Systems or its
licensees. Unauthorized repairs void registration and warranty.
8. Manufacturer: Multi-Tech Systems, Inc.
Trade name: MultiVOIP
Model Numbers: MVP400, MVP800
FCC Registration Number: AU7USA-26050-DV-N
REN: 0.2A
Modular Jack (USOC): RJ-11C or RJ-11W
Service Center in U.S.A.: Multi-Tech Systems Inc.
2205 Woodale Drive
Mounds View, MN 55112
(612) 785-3500 Fax (612) 785-9874
Canadian Limitations Notice
Ringer Equivalence Number
Notice: The ringer equivalence number (REN) assigned to each terminal device provides an
indication of the maximum number of terminals allowed to be connected to a phone interface. The
termination on an interface may consist of any combination of devices subject only to the requirement
that the sum of the ringer equivalence numbers of all the devices does not exceed 5.
Notice: The Industry Canada label identifies certified equipment. This certification means that the
equipment meets certain telecommunications network protective, operational and safety
requirements. The Department does not guarantee the equipment will operate to the user’s
satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company. The equipment must also be installed using an
acceptable method of connection. The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations. Repairs to certified equipment
should be made by an authorized Canadian maintenance facility designated by the supplier. Any
repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power
utility, phone lines and internal metallic water pipe system, if present, are connected together. This
precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselves, but should contact the