Multitech MultiVOIP 400, User Manual

Page: 51 / 88

51
Chapter 4 - MultiVOIP Software
Others Setup
Clicking the Others button on the main menu displays the Others Setup dialog box. This dialog box
lets you to enable SNMP Agent (the default is disabled) and set up all the necessary parameters;
enable or disable various remote configuration methods such as TFTP (Trivial File Transfer Protocol)
Server, Web Server, Dumb Terminal, and Telnet Server; and assign a Password to the MultiVOIP for
Internet security. These applications enable remote viewing and changing of the MultiVOIP
configuration, or updating firmware, from anywhere on the connected internetwork.
Verify that the desired applications are enabled (checked). The default condition is all applications are
checked. To disable a given application, click to uncheck the check box and disable support.
SNMP related operations can be performed only when the SNMP Agent is enabled (checked) on this
dialog box. The IP address of the system (i.e., SNMP Manager) that will receive the Traps from the
MultiVOIP should be entered in the IP Address field in the Trap Manager group. The Community
Name of the SNMP Manager receiving the Traps can be a maximum of 19 characters and is case
sensitive. The default Port Number of the SNMP Manager receiving the Traps is 162. The MultiVOIP
currently supports a maximum of two community users at a time, and they can be assigned either
Read/Write or Read Only rights.
For more information on using these applications, click the on-line Help button or refer to Chapter 5,
Remote Configuration and Management.